Two Bicycle Carrier Assembly | Extended | 40 Degree
$874.00
- 40 Degree departure angle and 600mm main beam length
- Suitable for most 4×4 vehicles with a rear mounted spare wheel
- 30 Seconds load/unload two bikes (no straps or tie downs)
- Quickly pivot down for convenient rear vehicle access
- Attach/detach main beam in seconds
- E-Bike Friendly
- 100% Australian owned and manufactured from 100% Australian steels and materials.
- Lifetime Warranty
*Carrier assembly only (Does not include Vehicle or Drawbar mounting system)
Add a vehicle mount? Click here to view the vehicle application list
Add a drawbar mount kit? Let us configure for you!
Non standard vehicle, rear options fitted or you’d just like us to assist? Let us configure for you!
Support and Stabilise Each Wheel
• Each wheel supported and stabilised at four contact points per wheel tread for maximum stability
• Protect fragile carbon fibre rims if a tyre goes flat
From narrow 18mm wide time trial tyres through to the fattest of MTB tyres, the iSi cradle’s unique design centres each wheel eliminating movement and vibration for the safest travel possible.
If a tyre does go flat during the journey, the wheel remains stabilised and protected as the tyre wraps around and protects fragile carbon fibre rims.
iSi wheel support cradles also eliminate bearing fretting issues caused by traditional platform and vertical shuttle racks when operated in off-highway conditions.
Regardless of how rough the track, the bikes are protected. Each bicycle is cradled securely with all loads spread through wheels that are inherently stabilised to eliminate harsh vibrations and loads on the bicycle frame, wheel and head stem bearings.
• Offset wheel cradle design to keep bicycles within silhouette of vehicle
• Adjust wheel cradles to suit different bicycle wheel bases
• Small clearance adjustments
Complete freedom to position adjacent bicycles regardless of individual wheelbase.
The unique iSi clever design wheel cradles cover a wide range of position adjustment that extends from offset one way, precisely centred through to offset the other way. In other words, two wheels may be positioned exactly side by side for zero side to side offset of the bicycles. This completely solves the problems created by other bicycle carriers that can’t be centred and leave no option but to push one bicycle to the left and the other to the right.
A neat and centred load that is as slim as possible delivers the most stable and safest dynamics for both highway and off-road travel.
• Unique Vertical adjustability for each wheel
• Each end of each bike has vertical adjustment
• Eliminate pesky handlebar to saddle or crank to crank clearance issues
This unique iSi feature eliminates the hassles of interference between bicycles that occur with other horizontal or vertical bicycle carriers.
For example, if a handlebar clashes with the adjacent bicycle saddle, swap the wheel cradle vertical settings to position the handlebar up and over or just below the adjacent saddle. Easy. No other bicycle carrier in the world has this clever feature available.
Adjust the vertical height of each wheel at each end of each bicycle. Sounds like a mouthful but an incredibly powerful feature to eliminate pesky clashes between bicycles.
Zero Side-to-Side Offset
• Narrow load for the greatest safety possible
• Maximum protection of bicycles from trackside obstacles
• Road-legal side overhang with modern long and slack mountain bikes
One of the important features unique to the iSi Extreme Duty Bicycle Carrier is the ability to position the bicycles side by side for absolutely zero sideways offset and the narrowest silhouette possible.
Absolutely vital when not only trickling through tight tracks, but also when squeezed through traffic and between parked cars.
The iSi bicycle carrier comprehensively solves the age old side overhang problem that plagues every other platform carrier in the world.
Relax and concentrate on the track and road ahead, safe with the knowledge that the bikes do not poke out past the sides of the car.
Zero Load Frame Support Cradle
• Gentle bicycle retention with effective vibration control
• High UV resistant with wide soft contact area
• Carbon-Safe
Designed with the sole purpose of keeping your bicycle upright – gently. A world of engineering has gone into the iSi Frame Support Cradle to deliver the world’s leading bicycle retention system.
To specifically address operation over harsh corrugations at speed, additional mass added to the contact area to eliminate high frequency vibrations.
Working in conjunction with iSi wheel support cradles that support and stabilise each wheel, iSi comprehensively eliminated the high-load issues that continue to plague other platform carriers that require high strap-down loads. Moreover, by gently supporting the frame, iSi eliminates the bearing fretting and static wear issues of wheel-only retention carriers experience. For high UV resistance, vibration isolation and a wide and soft contact, Australia’s leading rubber laboratories collaborated with iSi to design and extrude our own special section soft, supple and super durable rubber profile that is head and shoulders superior to every other bicycle carrier product on the planet. iSi’s thick, wide and flat contact area, acts as a highly effective vibration isolator and eliminates the abrasive issues of inferior round section pads.
With next to zero load, the iSi frame supports eliminate wheel and head stem fretting issues and deliver the ultimate protection for titanium, thin wall alloy and the most fragile of carbon fibre bicycle frames.
Tow Bar Pivot-Base
• 100% Australian steels for the toughest conditions and greatest durability
• Posi-Lock over-centre latch for easy pivot operation
• Never go looking for excuses to get into the back of the car
Strong and secure manufactured from 100% Australian high-strength plate steel and tube the iSi Pivot-Base is designed and manufactured to breeze over the harshest terrain.
With the simple push on the iSi Pozi-Lock latch, the main beam section pivots down low to gently lower the load for easy access to the rear of the vehicle. Moreover, by lowering the complete assembly, the bicycles remain secured to the iSi bicycle carrier for the maximum convenience possible.
When done, raise the beam to the upright position and the iSi Pozi-Lock latch does the job of securing the load. Slip the security pin in and you’re ready again to hit the road and tracks.
Strong and secure and the most highly effective connection to vehicle tow bars. Available in a variety of iSi Pivot-Base models for the ideal configuration for your particular tow bar.
Easy Vehicle Cargo Access
• Pivot down all the way for the best access
• Lightening quick 15 seconds to access the rear
• Pull out fridge and drawers friendly for side hinged rear doors
Nice and tight to the rear of the vehicle, rock solid and 15 seconds to access to the rear cargo compartment. Easy.
The iSi 4x4x2 bicycle carrier pivots down all the way right from the tow bar for the ultimate in quick and convenient access to the rear of the vehicle. Completely eliminates the hassles of bicycle carriers that just tilt but obstruct the opening of side hinged rear doors. When the door’s open, drawers and fridge slide will open fully for drivers of vehicles like the Toyota Prado, Jeep Wrangler, Mitsubishi Pajero, Nissan Patrol and many more.
There’s more to travelling with bicycles than simply loading them onto a car and transporting to a destination. Eliminate hassle and never go looking for excuses.
Massive Departure Clearance
• 40 or 25 Degree Departure Angle for the best clearance
• Tubes out of the tow bar eliminated to reverse or recover vehicle back out
• Steel plate to drag over rocks and through gullies whilst bikes protected
The best possible departure clearance is vital to protect the bikes from below but more importantly, positioned so that the bikes are protected from above and sides as well. 100% of the driver’s concentration can then be focused on the track ahead.
However, there’s more to departure clearance than simply raising the bikes up high. With the shortest possible protrusion out of the tow bar, the whole assembly is protected when dragging the rear over big rocks and deep gullies as well as those surprise high speed dips.
Moreover by eliminating tow bar protrusions that dig into the track, the car can drive back down or be recovered out of a steep river crossing without digging into the track.
Relax and concentrate on the track and obstacles ahead without worrying about dragging or smashing the bikes behind.
Thoroughly Engineered & Rigorously Tested
iSi carriers employ advanced Computer Aided Design and Finite Element Modeling and Analysis tools to ensure that the optimum structural and operational design criteria are met in a highly cost effective manner.
Then field tested over not only the harshest terrain using iSi’s fleet of dedicated off-road 4WD vehicles and caravans, but also long high speed highway travel.
Without doubt, iSi carriers deliver the ultimate in bicycle carrying performance and total peace of mind – regardless of the severity of the terrain.
Whether it be sustained high speed travel over rough washboard corrugations, rocks, soft and loose sand dunes, deep snow or running rivers, you’ll breathe easy with the knowledge that your bicycles are safe, secure and always ready for action.
Modular Carrier Assembly Sizes
Clear spare wheels, Ute Tray and equipment reducing departure clearance
• Clearance for spare wheels etc
• Tray back Utes clearance without tow bar extensions
• Off-Road specific ability to reverse or be recovered back out of gullies and steep river banks
By delivering a range of longer main beam carriers, iSi comprehensively eliminated the departure clearance issues that continue to plague other carriers.
Excellent clearance from the ute tray or spare wheel carrier without killing departure clearance. Reverse back out without digging the rear into the track.
Compact Beam
Perfect for most passenger and 4×4 vehicles without a rear mounted spare wheel.
Mid Beam
Ideal for most 4×4 vehicles with a rear mounted spare wheel.
Extended Beam
The best for most 4×4 vehicles with a large rear mounted spare wheel.
| Weight | 10.25 kg |
|---|---|
| Dimensions | 77 × 41 × 25 cm |
| Bicycle Capacity | 1-2 Bicycles |
| Weight Capacity | Maximum load across all bicycles = 64 kg |
| iSi Modular Component | Caravan Mount Compatible ✔ |
| No Straps or Tie Downs | ✔ |
| Carbon Safe | ✔ |
| Rated | Off-Road + On-Road |
| Bike Type | Road, Gravel, CX, MTB, E-Bike |
| Materials | 100% Australian Steels and Materials |
| Warranty | Lifetime |
