Wheel Support Cradle | Small | 16″ – 24″ dia |

$50.00

  • Suits all current generation 4x4x2 & 4x4x4 Bicycle Carriers
  • Suits all bikes with 16”-24” Wheel size
  • Suits all tyre sizes up to 3.1” (Road, MTB and E- Bikes)
  • No tie downs, straps or bungee cords required to retain wheels
Select which Type *
Add a Tee-Bolt Upgrade?
Tee-Bolt Upgrade ( + $3.50 )
Extra subtotal:$0.00

This iSi wheel support cradle uses a tough mandrel formed tube to support each wheel with four contact points per tyre. The offset sleeve design boasts complete adjustability of adjacent cradles even though they are on a common horizontal tube. Moreover, each cradle can also be set to a high or low position which is sensational if you need to sneak a bit of additional vertical clearance between two adjacent bikes.

Set each cradle high or low at each end of each bicycle in any combination to achieve the perfect loading configuration. Sometimes both forward bike wheels low and rear bike high or mix it up with front wheel high, rear low on each adjacent bicycle. Terrific to sneak clearance in those pesky situations where the handlebar is positioned just above the saddle of the adjacent bicycle.

In addition to other features built into the iSi carrier, this clever wheel cradle design completely solves the problem with other carrier products that force one bike to the left and another to the right. The iSi wheel support cradle design encourages the operator to set the bicycles for the most narrow load possible

Weight 0.6 kg
Dimensions 42 × 4 × 20 cm
Tyre Width

23mm – 3.1" (79mm)

Maximum load capacity (Per single cradle)

16kg

Maximum load capacity (Per bike)

32kg

Carbon Rim Compatible

Yes

Bike Type

Road, Gravel, CX, MTB, E-Bike

Warranty

Lifetime