Loading bikes is easy and convenient when you load them one wheel at a time. It completely eliminates the need to lift the entire bike at once which makes it much easier to manoeuvre and position. There’s no need for ramps or any kind of loading device, simply wheel the bike up one wheel at a time. The wheel cradles secure each wheel at four contact points, allowing you to share the weight of the bike with the carrier when loading and unloading. Moreover, with the wheels secured and stabilised, it eliminates the need for any straps or tie downs for the quickest bike loading and unloading.

Nice and tight to the rear of the vehicle, rock solid and 15 seconds to access to the rear cargo compartment. Easy.
The iSi Bicycle Carrier pivots down all the way right from the tow bar for the ultimate in quick and convenient access to the rear of the Prado. Completely eliminate the hassles of bicycle carriers that just tilt but obstruct the opening of side hinged rear doors. When the door’s open, drawers and fridge slide will open fully – it doesn’t get easier than that!

There’s more to travelling with bicycles than simply loading them onto a car and transporting to a destination. Eliminate hassle and never go looking for excuses.

We all know what it’s like when you get home tired on a Sunday evening and have to get the car ready for work the next morning. Removing and storing the iSi bicycle carrier dead easy. 20 seconds to un-pin the carrier from the vehicle pivot base and hang the carrier on the wall. That’s it.

Harsh terrain demands that each wheel is supported by iSi’s unique CNC complex-contour wheel support cradles that also stabilise each wheel at up to four contact points per tyre. From narrow 18mm wide time trial tyres through to the fattest of MTB tyres, the iSi cradle’s unique design continually centres each wheel eliminating movement and vibration for the safest travel possible. If a tyre does go flat during the journey, the wheel remains stabilised and protected as the tyre wraps around and protects fragile carbon fibre rims. iSi wheel support cradles also eliminate bearing fretting issues caused by traditional platform and vertical shuttle racks when operated in off-highway conditions. Regardless of how rough the track, the bikes are protected. Each bicycle is cradled securely with all loads spread through wheels that are inherently stabilised to eliminate harsh vibrations and loads on the bicycle frame, wheel and head stem bearings.

Strong and secure manufactured from 100% Australian high-strength plate steel and tube the iSi Pivot-Base is designed and manufactured to breeze over the harshest terrain. With the simple push on the iSi Pozi-Lock latch, the four bike rack section pivots down low to gently lower the load for easy access to the rear of the vehicle. Moreover, by lowering the complete assembly, the bicycles remain secured to the iSi bicycle carrier for the maximum convenience possible. When done, raise the beam to the upright position and the iSi Pozi-Lock latch does the job of securing the load. Slip the security pin in and you’re ready again to hit the road and tracks. Strong and secure and the most highly effective connection to vehicle tow bars. Available in a variety of iSi Pivot-Base models for the ideal configuration for your particular tow bar.

The best possible departure clearance provided by the four bike rack is vital to protect the bikes from below but more importantly, positioned so that the bikes are protected from above and sides as well. 100% of the driver’s concentration can then be focused on the track ahead.

However, there’s more to departure clearance than simply raising the bikes up high. With the shortest possible protrusion out of the tow bar, the whole assembly is protected when dragging the four bike rack over big rocks and deep gullies as well as those surprise high speed dips.

Moreover by eliminating tow bar protrusions that dig into the track, the car can drive back down or be recovered out of a steep river crossing without digging the four bike rack into the track. Relax and concentrate on the track and obstacles ahead without worrying about dragging or smashing the bikes behind.

iSi carriers employ advanced Computer Aided Design and Finite Element Modeling and Analysis tools to ensure that the optimum structural and operational design criteria are met in a highly cost effective manner.

Then field tested over not only the harshest terrain using iSi’s fleet of dedicated off-road 4WD vehicles and caravans, but also long high speed highway travel.

Without doubt, the iSi four bike rack delivers the ultimate in bicycle carrying performance and total peace of mind – regardless of the severity of the terrain.

Whether it be sustained high speed travel over rough washboard corrugations, rocks, soft and loose sand dunes, deep snow or running rivers, you’ll breathe easy with the knowledge that your bicycles are safe, secure and always ready for action.