For Vehicles
Tow-Bar Mounted Bike Racks
Modular 1-4 bike racks manufactured in Australia for cars, SUVs, 4WDs and utes.
Two Bike Rack Assembly | Compact | 40 Degree + PBM/H |
$1,299.00
Ships in 3–5 business days
·
Made in Melbourne
This is a Pre-Configured Vehicle Bike Rack to suit your application – all carriers can be swapped to our Bolt-On Drawbar Mount System. Just select your desired Wheel Support Cradle options and you’re ready for hassle-free travel with bikes on board.
What’s in the box:
- Two Bike Rack Assembly
- Tow Bar Mount System
Pre-Configured · Ready To Ride
Complete 2-Bike Ready-To-Fit
A complete pre-configured bike rack system for your vehicle. The 2-Bike Rack Assembly paired with the matching iSi Pivot Base Towbar Mount. All the modular components, the mounting system, every piece of hardware. Just choose your wheel cradle sizes and add to cart.
Complete System
Strap-Free
64kg Total Load
Lifetime Warranty
Bikes
2
64kg total load capacity
Beam Length
400mm
Compact
Departure Angle
40°
High clearance
Pivot Base Mount
PBM/H
Mid / High
What's In The Box
One Mount. One Complete Rack.
This pre-configured bundle combines the two essential parts of a complete vehicle bike rack: the carrier assembly that holds your bikes, and the tow bar mount system that attaches everything to your vehicle.
Part 01 · The Carrier
2-Bike Rack Assembly
The complete carrier component that holds your bikes. Main beam, wheel cradles, frame supports and all connecting hardware.
- 2-bike main beam (40° departure, 400mm)
- 4x Wheel Support Cradles
- 2x Frame Cradles (Carbon-Care rubber)
- All Tee-Handles and mounting hardware
Part 02 · The Mount
Tow Bar Mount System (PBM/H)
The pivot base that attaches the carrier to your vehicle's 50x50mm tow bar receiver. Configured as the Mid / High variant for your specific towbar setup.
- Modular pivot base (Mid / High)
- Anti-rattle hitch stabiliser included
- PoziLock over-centre latch
- Auxiliary licence plate holder
Towing A Caravan?All iSi carriers can be swapped to our Bolt-On Drawbar Mount System for caravan use. Same carrier, different mount.
Drawbar Mount
The iSi Difference
Completely Strap-Free
Every other bicycle carrier asks you to strap, bungee or tie your bikes down. iSi doesn't. The wheel cradles and frame supports work together to carry everything in perfect equilibrium, with zero tie-downs required.
Wheels Stabilise. Frames Cradle.
Two components, two distinct jobs. This is what makes the iSi system the only truly strap-free carrier on the market.
The Wheel Cradle
Carries 100% Of The Load
The Quad Contact wheel cradles grip each tyre at four points on the tread, locking the bike in position through the wheels. Every transport load, every vibration, every corrugation is handled through the wheel contact. No movement. No rolling. Zero strap-down force required.
The Frame Cradle
Zero Load. Just Cradles.
With the wheels carrying everything, the frame support's only job is to keep the bike upright. Wide, soft, UV-resistant Carbon-Care rubber gently cradles the frame without pressure. No high strap-down forces. No frame fretting. No paint damage. Safe for carbon, titanium and thin-wall alloy.
The result: the gentlest bicycle retention system in the world, with none of the strap fatigue, frame fretting or load-cycle issues that plague every other platform carrier.
Load And Unload The Easy Way
10 Seconds Per Bicycle
Loading bikes is easy when you load them one wheel at a time. No straps, no tie-downs, no ramps required even for heavy e-bikes.
Wheel-By-Wheel Loading
Share The Weight With The Carrier
Loading one wheel at a time eliminates the need to lift the entire bike at once. The wheel cradles secure each wheel at four contact points, allowing you to share the weight of the bike with the carrier as you load. No ramps. No straps. Just wheel it up.
- 10-second load time per bicycle
- No ramps required, even for heavy e-bikes
- Zero straps or tie-downs in the entire system
15-Second Rear Access
Cargo Area Unlocked. Bikes Still Loaded.
The pivot mechanism lowers the entire carrier (with bikes on board) in seconds, providing full access to drop-down tailgates, side-hinged barn doors or pull-out drawer systems. Essential for vehicles like the Toyota Prado, Jeep Wrangler, Mitsubishi Pajero and Nissan Patrol.
- 15 seconds to rear cargo access
- Works with bikes on board, no unloading required
- PoziLock latch holds rock solid during travel
Engineered For The Track Ahead
Off-Road Geometry
iSi carriers are designed so you can focus on the track ahead, not worrying about the bikes behind.
Massive Departure Clearance
Drag Over Rocks. Bikes Stay Safe.
The 40° departure angle protects bikes from below, with the shortest possible protrusion out of the tow bar so the whole assembly clears big rocks, deep gullies and high-speed dips. No tubes dig into the track when reversing out of river crossings or recovery situations.
- 40° departure clearance angle
- Steel plate drags over rocks, bikes stay protected
- Shortest tow-bar protrusion in the market
Horizontal + Vertical Adjustment
Every Wheel. Every Position.
Each wheel cradle slides along an offset sleeve for horizontal positioning, AND has a high/low vertical setting. Handlebar clashes with an adjacent saddle? Swap the vertical setting. Wheelbase difference between road and MTB? Adjust horizontally. No other carrier has both.
- Horizontal: offset, centred or staggered
- Vertical: high/low per wheel, per end, per bike
- Wheelbases up to 1,600mm, zero side-to-side offset
Add On
Add A Lightboard
Obscuring Your Rear Lights?
When your bikes cover the rear of your vehicle, your tail lights, indicators and brake lights disappear with them. The iSi Lightboard System puts them back where they belong.
Recommended Add-On
iSi Lightboard System
IP67-rated LED tail lights, indicators, brake lights and licence plate holder in one sealed unit. Plug-and-play 7-pin flat trailer connector. Multiple cable lengths to match your carrier.
More Features
System Key Features
Any Bike Type
Road, gravel, MTB, e-bike, fat bike. Adjustable wheel and frame cradles handle any combination on the same carrier.
Anti-Rattle Stabiliser
The integrated hitch stabiliser locks the carrier rock-solid in the towbar receiver, eliminating wobble and rattle on rough roads.
Swap To Caravan
Add the optional drawbar mount system to swap the carrier between vehicle and caravan in under a minute. No tools, just pin and go.
Industry-Leading Finish
Sandblasted, zinc-plated, textured powder coated. Multi-layer protection against stone chips, salt, UV and corrosive extremes.
Space-Saving Storage
20 seconds to un-pin the carrier from the pivot base and hang it on the wall. Vehicle ready for Monday morning.
FEA Engineered
Computer-Aided Design and Finite Element Analysis. Field-tested on the harshest terrain at highway speeds.
Zero Side-To-Side Offset
Position both bikes side-by-side for the narrowest possible silhouette. Road-legal width even with long, slack modern MTBs.
Carbon Safe
Carbon-Care rubber is UV-resistant, vibration-dampening and gentle on carbon, titanium and thin-wall alloy frames.
Lifetime
Warranty
64kg
Total Load
Made In
Melbourne
30 Day
Returns
Not sure this is the right fit for your vehicle?
Our team can confirm the correct pivot base length and profile for your tow bar. Send through your vehicle make, model and year and we'll match it to the right configuration.
