For Vehicles
Tow-Bar Mounted Bike Racks
Modular 1-4 bike racks manufactured in Australia for cars, SUVs, 4WDs and utes.
Wall Mount
$55.00
Ships in 3–5 business days
·
Made in Melbourne
Keep your Bike Rack organised and off the floor with our Wall Mount. Made from 6 mm stainless steel and laser cut, this bracket features a 9 mm mounting hole for secure installation. Hardware is to be sourced locally for optimal fit and convenience.
Note: Sold in Pairs
Stainless Steel · Laser Cut
Off The Floor. On The Wall.
The iSi Wall Mount is a clean, minimal storage solution that keeps your bike rack organised and off the garage floor. Laser cut from 6mm stainless steel, the pair of brackets hold your carrier securely against the wall with easy access whenever you need it. No more tripping over the rack in the dark.
6mm Stainless Steel
Laser Cut Precision
Sold In Pairs
Lifetime Warranty
6mm
Stainless Steel
9mm
Mounting Hole
2
Brackets Per Set
Laser
Cut Finish
Garage Storage
Your Carrier Deserves A Proper Home
When the rack's not on the vehicle, it needs somewhere solid to live. The Wall Mount keeps your carrier accessible, organised and out of the way.
Minimal Design, Maximum Function
Clean, Secure, Accessible
The bracket profile is deliberately minimal. Two stainless steel hooks hold the carrier beam securely against the wall, keeping the floor clear and the rack within easy reach. When it's time to load up, lift the carrier off the wall and you're out the door.
- Keeps the carrier off the garage floor
- Easy lift-on, lift-off access
- Minimal profile, clean look on any wall
- Compatible with all iSi carrier main beams
Manufactured To Last
Wall Mount Key Features
Simple product, no compromise on materials or manufacturing quality.
6mm Stainless Steel
Laser cut from solid 6mm stainless steel plate. No bending, no welding, no weak points. The material alone handles more load than you'll ever put on it.
Laser Cut Precision
Laser cutting delivers clean edges, precise geometry and a professional finish straight off the machine. No grinding, no rough spots, no sharp edges.
Any Wall, Any Setup
The 9mm mounting hole accepts standard hardware for brick, timber, steel stud and concrete walls. Source the right fastener for your wall type from any hardware store and you're set.
Sold In Pairs
Each order includes two Wall Mount brackets, which is a complete set for one carrier.
Mounting Hardware
Bolts, anchors or screws are not included. This is intentional so you can select the right fastener for your specific wall type (brick, timber stud, concrete, steel). Any hardware store will have what you need.
Lifetime
Warranty
6mm
Stainless Steel
Made In
Melbourne
30 Day
Returns
Keep your garage tidy
At $55 for a pair of laser-cut stainless brackets, it's the easiest upgrade to your garage storage.
| Specifications | Two Bicycle Carrier | Four Bicycle Carrier | Drawbar Mount Systems | Vehicle Mount Systems |
|---|---|---|---|---|
 |
 |
 |
 |
|
| Weight | 14.15kg | 25.75kg | 9.80kg – 21.20kg | 4.80kg – 6.30kg |
| Bicycle Capacity | 1- 2 Bicycles | 1 – 4 Bicycles | – | – |
| Weight Capacity |
64kg Total Load Up to 32kg per bicycle Up to 16kg per wheel |
84kg Total Load Up to 32kg per bicycle Up to 16kg per wheel |
– | – |
| iSi Modular Component | Drawbar Mount Compatible ☑
Vehicle Mount Compatible ☑ |
Drawbar Mount Compatible ☑
Vehicle Mount Compatible ☑ |
Two and Four Bicycle Carrier Compatible ☑ | Two and Four Bicycle Carrier Compatible ☑ |
| Pivot Function | ☑ | ☑ | Pivot Up & Over | Pivot down to the ground |
| No Straps or Tie Downs | ☑ | ☑ | ☑ | ☑ |
| Light Board Compatible | ☑ | ☑ | ☑ | ☑ |
| Carbon Safe | ☑ | ☑ | ☑ | ☑ |
| Rating | On–Road + Off–Road | On–Road + Off–Road | On–Road + Off–Road | On–Road + Off–Road |
| Materials | 100% Australian Made with 100% Australian steels | 100% Australian Made with 100% Australian steels | 100% Australian Made with 100% Australian steels | 100% Australian Made with 100% Australian steels |
| Warranty | Lifetime Warranty | Lifetime Warranty | Lifetime Warranty | Lifetime Warranty |
| Buyback Program | ☑ | ☑ | ☑ | ☑ |
Frame Support Cradles
iSi Frame Support Cradles are designed to keep the bicycle upright while all transport loads are handled through the Four Point Wheel Cradles. Manufactured from solid steel rod, they resist high-frequency vibrations over corrugated roads. A proprietary rubber compound developed in house features a wide, soft, and UV-resistant rubber. The result is unmatched protection for even the most delicate carbon, titanium, or thin-wall alloy frames.
Main Beam
The main beam is the structural backbone of the iSi carrier and is available in both 25° and 40° departure angle configurations at various lengths. With bikes staggered vertically along the beam, this stadium-style layout reduces the rack’s overall length by managing hub-to-hub clearance. This results in the most compact rack profile on the market, minimising rear overhang on the vehicle.
The staggered positioning also provides a clear working field for loading and unloading bikes with no overlapping handlebars or awkward reach-arounds. Designed for 2- or 4-bike configurations, the main beam connects tool-free to the pivot base and can be quickly swapped to a trailer or removed as needed. It’s a rigid, modular foundation that delivers both performance and practicality for serious adventure travel.
Tow Bar Pivot Base Mounts
The iSi Pivot Base is a robust modular hitch mount that comes standard with a high-tensile anti-rattle hitch stabiliser and an integrated auxiliary license plate holder (or optional lightboard). It’s offered in multiple height and length configurations for the best compatibility for different towbar depths and clearances for drop-down tailgates or rear swing out doors. Moreover, the modular mounts provide ample departure clearance so your bikes or rack avoid ground strikes. The design also features adjustable mounting positions (with multiple hitch pin holes) for fine-tuning the rack’s position relative to your vehicle, yielding a perfect fit tight to the vehicle while providing and secure wobble-free performance.
Adjustable Quad Contact Wheel Cradles
Each bike is stabilised and secured via our Quad Contact Wheel Cradle system with no clamps, bungees, or tie-downs required. The mandrel bent hoops support the tyre at four points on the tread, locking the bike in position through the wheels. This eliminates any unwanted bike movement or rolling left and right as you travel especially over corrugations or off-road tracks. Each cradle is mounted on a sliding offset sleeve, allowing independent height adjustment to finely control handlebar and saddle clearance. Bikes sit tighter and more securely with a narrower footprint, creating a compact, stable load without compromising ease of loading.
