Loading bikes is easy when you load them one wheel at a time. It completely eliminates the need to lift the entire bike at once which makes it much easier to manoeuvre and position. There’s no need for ramps or any kind of loading device, simply wheel the bike up one wheel at a time. The wheel cradles secure each wheel at four contact points, allowing you to share the weight of the bike with the carrier when loading and unloading. Moreover, with the wheels secured and stabilised, it eliminates the need for any straps or tie downs for the quickest bike loading and unloading.

Nice and tight to the rear of the vehicle, rock solid and 15 seconds to access to the rear cargo compartment. Easy.
The iSi 4x4x2 bicycle carrier pivots down all the way right from the tow bar for the ultimate in quick and convenient access to the rear of the vehicle. Completely eliminates the hassles of bicycle carriers that just tilt but obstruct the opening of side hinged rear doors. When the door’s open, drawers and fridge slide will open fully for drivers of vehicles like the Toyota Prado, Jeep Wrangler, Mitsubishi Pajero, Nissan Patrol and many more.

There’s more to travelling with bicycles than simply loading them onto a car and transporting to a destination. Eliminate hassle and never go looking for excuses.

Add an optional Vehicle Mount System to swap the carrier between the trailer and the car quickly and easily. It’s great to base camp with the trailer and move the carrier to the car and explore areas that may not be appropriate to drag the camper or caravan through. When you have the flexibility you use it to make the most of each trip and because we make it easy to swap, you don’t go looking for excuses to leave the bikes alone. There’s always something nearby to explore so make the most of each and every journey.

Strong and secure manufactured from 100% Australian high-strength plate steel and tube the iSi Pivot-Base is designed and manufactured to breeze over the harshest terrain. With the simple push on the iSi Pozi-Lock latch, the main beam section pivots down low to gently lower the load for easy access to the rear of the vehicle. Moreover, by lowering the complete assembly, the bicycles remain secured to the iSi bicycle carrier for the maximum convenience possible. When done, raise the beam to the upright position and the iSi Pozi-Lock latch does the job of securing the load. Slip the security pin in and you’re ready again to hit the road and tracks. Strong and secure and the most highly effective connection to vehicle tow bars. Available in a variety of iSi Pivot-Base models for the ideal configuration for your particular tow bar.

Harsh terrain demands that each wheel is supported by iSi’s unique CNC complex-contour wheel support cradles that also stabilise each wheel at up to four contact points per tyre. From narrow 18mm wide time trial tyres through to the fattest of MTB tyres, the iSi cradle’s unique design continually centres each wheel eliminating movement and vibration for the safest travel possible. If a tyre does go flat during the journey, the wheel remains stabilised and protected as the tyre wraps around and protects fragile carbon fibre rims. iSi wheel support cradles also eliminate bearing fretting issues caused by traditional platform and vertical shuttle racks when operated in off-highway conditions. Regardless of how rough the track, the bikes are protected. Each bicycle is cradled securely with all loads spread through wheels that are inherently stabilised to eliminate harsh vibrations and loads on the bicycle frame, wheel and head stem bearings.

One of the important features unique to the iSi Two Bike Rack is the ability to position the bicycles side by side for absolutely zero sideways offset and the narrowest silhouette possible.

Absolutely vital when not only trickling through tight tracks, but also when squeezed through traffic and between parked cars.

The iSi bicycle carrier comprehensively solves the age old side overhang problem that plagues every other platform carrier in the world.

Relax and concentrate on the track and road ahead, safe with the knowledge that the bikes do not poke out past the sides of the car.

The best possible departure clearance is vital to protect the bikes from below but more importantly, positioned so that the bikes are protected from above and sides as well. 100% of the driver’s concentration can then be focused on the track ahead.

However, there’s more to departure clearance than simply raising the bikes up high. With the shortest possible protrusion out of the tow bar, the whole assembly is protected when dragging the rear over big rocks and deep gullies as well as those surprise high speed dips.

Moreover by eliminating tow bar protrusions that dig into the track, the car can drive back down or be recovered out of a steep river crossing without digging into the track.

Relax and concentrate on the track and obstacles ahead without worrying about dragging or smashing the bikes behind.