RhinoMax

This RhinoMax bike rack is an Extreme Duty Two Bicycle Carrier on a drawbar mount developed specifically for RhinoMax offroad camper trailers. RhinoMax build serious hybrid campers with drawbars engineered for hard country, and the mount is dimensioned to that geometry rather than adapted to it, sitting on the drawbar as if it left the RhinoMax factory there.

A hybrid camper’s drawbar carries stone shields, jerry can holders and often a spare, so the carrier’s position is chosen to leave that hardware working while the bikes ride above it. The load lands where a trailer tows it best, roughly 70% to the tow ball and 30% to the axle, and the carrier pivots with the bikes loaded so the camper opens at camp without an unloading ritual first.

The 500mm beam Two Bike Carrier is rated to 64kg and carries up to 32kg per bike, enough for two adult mountain bikes or e-bikes, each held by the frame in its own cradle where wide tyres and full suspension change nothing.

Every system is manufactured in Mitcham, Victoria, as they have been since 2007, from Australian mild steel and stainless steel, zinc primed and finished in textured Dulux powder coat, and covered by a lifetime warranty. Hybrid and offroad camper configurations are part of our caravan bike racks range, with tow vehicle systems in the pre-configured vehicle carriers.