Toyota Land Cruiser 75 Series

This Toyota Land Cruiser 75 Series bike rack is an Extreme Duty Extended two bike configuration manufactured by iSi, with a 600mm extended carrier mounted at the rear of the vehicle through a tow bar mount system. It was installed for a lap of outback Australia, and it earned its keep.

Mounting through the tow bar keeps both bikes low behind the Land Cruiser, where the weight rides close to the chassis and the handling stays predictable on rough ground. The extended 600mm carrier gives the bikes generous cradle spacing, each position rated to 32kg, and the carrier pivots up with the bikes loaded whenever access behind the vehicle is needed. Owners of other LandCruiser models can compare configurations on our LandCruiser bike racks page.

Proven in the outback

The route this system covered speaks for itself: up through the Centre past Camerons Corner and the Oodnadatta Track to Alice Springs and the MacDonnell Ranges, on to the Kimberley and the Gibb River Road, then down to Broome and the Pilbara. That is over 4000km of corrugated dirt with two bikes on board, and the carrier did not miss a beat. If you drive something different, the vehicle bike rack range covers most makes and models.

iSi has manufactured its carrier systems in Mitcham, Victoria since 2007 from Australian mild steel and stainless steel, zinc primed and finished in textured Dulux powder coat, with a lifetime warranty on every system. If you are planning your own remote trip, the pre-configured vehicle carriers cover most 4x4s, and the sales team can configure this exact system for your vehicle.